1- Driveres door open & unlocked. Key out of ignition

2- Insert & remove key 2 times within 5 seconds

3- Close & open drivers door twice within 40 seconds

4- Insert key into ignition & remove

5- Close & open drivers door twice within 40 seconds

6- Insert key into ignition

7- Close the door

8- Turn ignition switch from "LOCK" to "ON" & back to "LOCK"
- ONCE for ADD mode
 - TWICE for REWRITE mode

9- Remove the key from ignition

10- To confirm your mode selection, the power locks will nowcycle "lock" to
"unlock" a number of times corresponding toyour key cycles in step 8

11- Within 40 seconds of confirmation
- Press both transmitter Lock & Ulock buttons simultaneously
- Within 3 seconds press transmitter Lock button for more than 1 second
- If successful, the power locks will cycle once (twice indicates
transmitterproblems)
- Repeat step 11 for additional remotes

12- Open door to exit programing