Use this Procedure for Vehicles withDriver Information Center Buttons

This information is in your Owners Manualin theDriversInformation Center Section.

1.Insert Key and turn to ONposition so you can access Driver Information Center

2. Press the vehicle information button until
PRESS TO RELEARN REMOTE KEY displays

3. Press the set/reset button until
REMOTE KEY LEARNING ACTIVEdisplays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same
time forapproximatley 15 seconds. A chime will sound indicating that the remote is
programmed.

5.To program additional remotes at this time repeat step 3.
This vehicle can have a maximum ofeight remotes programmed.

6.To exit programming mode turn key off and remove key.
Test remote(s).

Use this Procedure for VehicleswithoutDrivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in theon position(as far
as you can go without cranking engine)

1. Press the trip odometer reset stem untilRELEARN REMOTE KEY displays.

2.Press and hold the trip odometer reset stem for threeseconds.
The messageREMOTE KEY LEARNING ACTIVEwill display

3.Press and hold the lock and unlock buttons on the first keylessremote atthe same
timefor approximately 15 seconds. A chimewill soundindicating that the remote is
programmed.

4.To program additional remotes at this time repeat step 3.
Thisvehicle can have a maximum of eight remotes programmed.

5.To exit programming mode turn key off and remove key.
Test remote(s).